CGU O25150-42 Invader Copper Gasket 73MM .042 1.06MM

( Brand: Cgu ), ( Manufacturer Part Number: O25150-42 ), ( Part Type: Gasket ), ( Country/region Of Manufacture: United States )

Review CGU Kawasaki Snowmobile Invader Copper Gasket 73mm .042 Inch 1.06mm fits 440 1978-81

Introducing the CGU O25150-42 1978-81 Kawasaki Invader 440 Copper Gasket, a crucial component for maintaining the optimal performance and sealing of your classic motorcycle's engine. This gasket, specifically designed for Kawasaki Invader 440 models produced between 1978 and 1981, is a must-have for any dedicated enthusiast or mechanic working on these iconic motorcycles.

The gasket measures 73mm in diameter and has a thickness of 1.06mm, making it an exact fit for the engine cylinder head of your Invader 440. Manufactured from high-quality copper material, this gasket provides excellent sealing properties, ensuring that coolant stays where it's supposed to, within the engine, and prevents unwanted leaks.

The use of copper in this gasket offers several advantages. Copper gaskets are known for their durability, resilience, and ability to withstand extreme temperatures. They can adapt to the slight variations in surface finishing and engine wear that occur with time, ensuring a tight seal even in engines that have seen many miles.

Installing the CGU O25150-42 gasket is a straightforward process. Simply remove the old gasket, clean the surfaces thoroughly, apply a suitable sealant if necessary, and install the new gasket before reassembling the engine. Proper installation is essential to ensure the longevity and effectiveness of the gasket.

In summary, the CGU O25150-42 1978-81 Kawasaki Invader 440 Copper Gasket is a vital replacement part for any Invader 440 owner or restorer. Its precise dimensions, high-quality copper material, and proven sealing properties make it an essential addition to your motorcycle toolkit or workshop. By using this gasket, you not only ensure the continued performance and reliability of your classic Kawasaki but also contribute to its aesthetic appeal by maintaining the originality of its engine components.

Pros and Cons of Buying a CGU O25150-42 1978-81 Kawasaki Invader 440 Copper Gasket (73mm, 0.42.1.06mm)

This article aims to provide an objective analysis of the pros and cons of purchasing a CGU O25150-42 1978-81 Kawasaki Invader 440 Copper Gasket (73mm, 0.42.1.06mm).

1. High-Quality Material: Copper gaskets are known for their durability and resistance to high temperatures and pressures, making them an ideal choice for engine components. This CGU gasket is made of copper, ensuring a long-lasting solution for your Kawasaki Invader 440.

2. Precise Fit: The gasket is specifically designed for 1978-81 Kawasaki Invader 440 models, ensuring a precise fit and minimizing the risk of leaks or other issues.

3. Availability: Copper gaskets are widely available, and this particular gasket can be easily purchased online from various automotive parts retailers.

1. Cost: Copper gaskets tend to be more expensive than their rubber or composite counterparts. However, their durability and long-lasting nature often justify the additional cost.

2. Installation: Installing a copper gasket requires more care and attention than installing a rubber gasket, as it is more brittle and prone to damage. It is recommended that the installation is done by a professional to avoid any potential issues.

3. Corrosion: Copper gaskets are susceptible to corrosion, especially in environments with high levels of acidity or salt content. Proper maintenance and care, such as regular inspections and timely replacement, are necessary to prevent corrosion and ensure the longevity of the gasket.

The CGU O25150-42 1978-81 Kawasaki Invader 440 Copper Gasket (73mm, 0.42.1.06mm) offers several advantages, including its high-quality material, precise fit, and availability. However, it also comes with some drawbacks, such as its higher cost, more complicated installation process, and susceptibility to corrosion. Ultimately, the decision to purchase this gasket depends on your budget, installation capabilities, and maintenance schedule. If you are willing to invest in a durable, long-lasting solution and have the means to properly install and maintain the gasket, it may be a worthwhile investment. If not, a less expensive, easier-to-install rubber gasket may be a more practical choice.

Details:

Please message me, Need different bore or thickness. Made In USA, Sold as a set two gaskets, Bore 73mm, Thickness .042 1.06mm, Copper is reusable if not damaged, Need different bore or thickness.

specifications enginesnowmobile:

• for models: 440
• for makes: Kawasaki
• for years: 1978-81
• brand: Cgu
• mpn: O25150-42
• part type: Gasket
• country/region of manufacture: United States

shipping enginesnowmobile:

• service: USPS First Class
• type: Fixed
• transit: 4-9 Days
• class: Standard
• carrier: USPS
• cost: $5.00

offer enginesnowmobile:

• availability: In Stock
• started: May 29, 2025
• sold: 0
• options: Ship-to-home
• quantity: 5

general enginesnowmobile:

• Snowmobile Parts > Engines Components > Snowmobile Engine Components
• condition: New

payments enginesnowmobile:

• other
• wallet: Paypal
• money order
• credit card: Mastercard

returns enginesnowmobile:

• paid by: Buyer
• time: 14 Days
• policy: Returns Accepted

seller enginesnowmobile:

• city: Peoria, Arizona
• rating: 99.5%
• # reviews: 6887