L-SLEEVE FL1086 Cylinder 68.00MM

( Brand: L-sleeve ), ( Manufacturer Part Number: FL1086 ), ( Part Type: Cylinder ), ( Vehicletype: Snow ), ( Proposition 65 Information: See Item Details ), ( Authorized Dealer: Yes ), ( Photo Disclaimer: For Reference Only, See Item Details ), ( Legal Disclaimer: Your Local Laws Before Purchasing )

Review L SLEEVE 68.00mm La Cylinder Bore Free Shipping Today Powersport Superstore Buy

68 x 0.086 Inch Sleeve for FL1086 Cylinder

The 68 x 0.086 inch sleeve, also referred to as a wear band or a cylinder sleeve, is an essential component used in hydraulic cylinders, particularly those with the FL1086 model reference. This sleeve provides a protective barrier between the cylinder rod and the cylinder bore to prevent leakage and wear, ensuring the efficient, long-lasting performance of the hydraulic system.

These sleeves are typically manufactured from high-quality materials, such as brass, bronze, or steel, for excellent resistance to wear, corrosion, and impact. Brass or bronze options offer superior flexibility and conformability for tight-fit applications, while steel sleeves offer higher compressive strength and durability in high-pressure environments.

The 68 mm outer diameter (OD) sleeve measures 0.086 inches or 0.2184 centimeters thick. These dimensions fit standard FL1086 hydraulic cylinders. Wear bands come in various lengths to accommodate the required length of the cylinder piston, with the outer ends generally tapered for a perfect fit onto the cylinder bore.

To install a sleeve into a hydraulic cylinder, the cylinder must be disassembled. The sections holding the sleeve in place are typically loosened, allowing the rod or piston to be removed, and the sleeve can be slid into the cylinder bore. The rod or piston is then reinstalled with the sleeve sandwiched between it and the cylinder bore. Proper assembly is crucial to secure a tight tolerance and effective function.

1. Leak Prevention: The sleeve seals the space between the cylinder rod and the bore, minimizing hydraulic fluid leakage and maintaining system efficiency.

2. Longevity: The sleeve acts as a shield against aggressive hydraulic fluid, debris, and external impacts, extending the life of the cylinder and reducing maintenance requirements.

3. Enhanced Performance: As the sleeve conforms to the bore and cylinder rod, it reduces the amount of outer diametric motion, resulting in smoother operating cylinders, and increased bending and torsional rigidity.

4. Cost-Effective: A worn cylinder rod can be a costly repair compared to merely replacing the sleeve, making them a cost-effective solution for cylinder maintenance.

5. Wide Application: Sleeves are used in a wide range of industries, including construction, agriculture, manufacturing, and more, making them a versatile solution for diverse cylinder applications.

A 68 x 0.086 inch sleeve is a vital component that extends the lifespan and improves the efficiency of FL1086 hydraulic cylinders. Engineered for high performance, durability, and versatility, the sleeve is an essential investment for any hydraulic system. By choosing a high-quality sleeve and installing it correctly, equipment operators can experience enhanced productivity, reduced downtime, and cost savings.

Pros and Cons of Buying a 68 mm Sleeve for an FL1086 Cylinder

The FL1086 cylinder is a widely used component in hydraulic systems. A sleeve for this cylinder, specifically a 68 mm sleeve, can be an essential upgrade or replacement. Here are some pros and cons of investing in a 68 mm sleeve for an FL1086 cylinder.

1. Increased sealing efficiency: A 68 mm sleeve can provide improved sealing due to its larger diameter, reducing the chances of leakage and improving hydraulic system efficiency.

2. Enhanced load capacity: A larger sleeve diameter can support higher loads, allowing for increased operating pressure and enhanced system performance in heavy-duty applications.

3. Improved durability: A 68 mm sleeve can be made from more robust materials compared to the standard sleeve, providing better resistance to wear and tear, corrosion, and other damaging factors.

4. Longer lifespan: Due to improved sealing, load capacity, and durability, a 68 mm sleeve may last longer than a standard sleeve, reducing the need for frequent replacement.

5. Customization possibilities: A larger sleeve diameter allows for custom applications in unique hydraulic systems, ensuring the component fits the requirement perfectly.

1. Cost: A 68 mm sleeve is generally more expensive compared to a standard sleeve, resulting in a higher upfront investment.

2. Weight and size: The larger diameter of a 68 mm sleeve may add to the weight and overall size of the hydraulic cylinder, impacting the system's overall performance and maneuverability.

3. Installation complexity: Installing a larger sleeve involves more complicated procedures compared to a standard sleeve replacement, potentially increasing labor costs and downtime for the system.

4. Potential compatibility issues: A 68 mm sleeve may not be suitable for all applications or older systems, requiring confirmation that the hydraulic system can accommodate the sleeve's size and specifications.

Considering the pros and cons, the decision to invest in a 68 mm sleeve for an FL1086 cylinder depends on the specific requirements of your hydraulic system. If increased load capacity, sealing efficiency, and durability are essential, or if your system needs customization, a 68 mm sleeve might be the best choice. However, the increased cost, weight, size, installation complexity, and potential compatibility issues should be carefully weighed against the benefits before making a final decision.

To make an informed decision, assess your hydraulic system's performance requirements, budget, and compatibility with the 68 mm sleeve. If the benefits outweigh the cons, a 68 mm sleeve could be a worthwhile investment for enhancing the system's efficiency, durability, and overall performance. If not, it may be best to stick with a standard sleeve for cost-effectiveness. Consult with a hydraulic engineer or repair professional for further guidance on your specific situation.

Details:

An economical solution available for riders, racers and engine builders everywhere. Photos are for reference only.

On the continent of north America. Re-Sleeve worn or seized cylinders with Sleeves manufactured by la Sleeve co.

Actual product may differ from the item shown in photograph. Centrifugal castings used in these Sleeves are made from a carbon-chrome-molybdenum alloy of 200 brine ll hardness, ensuring ease installation, trouble-free boring and dependable, long-lasting engine.

part #: fl1086 prices

• $106.16-$198.54

specifications enginesnowmobile:

• brand: L-sleeve
• mpn: Fl1086
• part type: Cylinder
• vehicletype: Snow
• proposition 65 information: See Item Details
• authorized dealer: Yes
• photo disclaimer: For Reference Only, See Item Details
• legal disclaimer: Your Local Laws Before Purchasing

Ratings:

1. Thumbs up. 2 day delivery. 08-26-18
2. F r den Preis sehr gute Ware, gern wieder 08-26-18
3. A 08-26-18
4. Exact bulbs I needed. 08-26-18
5. Good deal 08-26-18

Shipping enginesnowmobile:

• handling: days
• cost: $0.0
• type: Flat

General enginesnowmobile:

• motors > partsaccessories > snowmobile partsaccessories > snowmobile engines components
• condition: New
• in stock: Yes

Returns enginesnowmobile:

• policy: returns accepted
• paid by: Buyer
• time: 60 Days

Seller enginesnowmobile:

• city: Cedar Park, Texas
• zipcode: 78613

Offer enginesnowmobile:

• quantity: 1
• best offer: false
• Sold: 0
• bids: 0
• Started: August 26, 2018, 12:34 am

Payments enginesnowmobile:

• PayPal

L-sleeve FL1086 Is Similar To:

• 2122sl Wiseco Nos Cylinder Sleeve (44.4% similar) Wisc cylinder sleeve 2122SL new old shelf stock free shipping...(September 24th, 2017)
• 2130sl Wiseco Nos Cylinder Sleeve (47.6% similar) Wisc cylinder sleeve 2130SL new old shelf stock free shipping...(April 25th, 2017)
• 420613605 Ski-doo Cylinder Sleeve (47.6% similar) ...(March 7th, 2015)
• 420613628 Mxz Legend Cylinder With Sleeve Used (44.7% similar) Price is for 1 cylinder. Crank went in the motor with 3700 miles on it. Stock bore size. Pulled from a 2003 legend cylinders were not effected. Good condition. I have 2 available...(April 2nd, 2018)
• 85-88mm 97 98 99 00 01 02 03 04 05 Slp Psi Cpi Racing New Cylinder Big Bore Sleeve 85mm Polaris 700 Rmk Xc X Switchback (26.8% similar) Sleds with these big bore engines run well and create good hp. These are some nos sleeves that were used by slap and psi back in the day to turn your 700CC into an 760 or 800CC. These will allow you to run an 85 88MM piston in what was stock 81MM. Big bore cylinder sleeves 85 88MM bore. Most common ...(September 26th, 2016)
• Fl-1317 La Sleeve Cylinder Bore (88.5% similar) Centrifugal castings used in these sleeves are made from a carbon-chrome-molybdenum alloy of 200 brine ll hardness, ensuring ease installation, trouble-free boring and dependable, long-lasting engine. On the continent of north America. Actual product may differ from the item shown in photograph. ...(September 13th, 2018)
• Cylinder Arctic Suzuki Series Sleeve Lasleeve 76-78 5000 Cat Fl1063 Snowmobile (20.4% similar) 500CC, 70MM. This is for a la sleeve FL1063 arctic cat Suzuki series snowmobile cylinder sleeve...(March 13th, 2015)
• Fl1085 L Sleeve Cylinder Kawasaki (76.2% similar) ...(November 14th, 2017)
• Fl1093 L Sleeve Cylinder 340tx (76.7% similar) ...(November 14th, 2017)
• Fl1094 La Sleeve L.a Cylinder (78% similar) When using a 1/1 6 wall sleeve, the cast-in liner will not be completely removed. Sleeves are constructed of an alloy carbon chrome, and molybdenum 200 brine ll hardness this construction insures ease installation, trouble free boring dependable long engine life sleeves all center less ground for ...(October 11th, 2017)
• Fl1095 La Sleeve L.a Cylinder (78% similar) Sleeve products. Heat the cylinder to remove sleeve. No junk, knock offs and seconds. The cylinder must be bored out to accept new sleeve. The sleeve is designed to insert into iron lined cylinder. The cylinder must be bored to accept new sleeve.: sleeves are constructed of an alloy carbon chrome, ...(September 13th, 2017)